Pro Tips On How to Clean a Concrete Driveway
Serving Sioux Falls, SD, since 2013.
Professional Tips on How to Clean a Concrete Driveway

Pro Tips On How to Clean a Concrete Driveway

When you clean a concrete driveway, it doesn’t just look good—it becomes a protected and cared-for investment in your home and property. Over time, driveways take a beating from vehicles, oil spills, weather, and daily use. Dirt, stains, mildew, and even tire marks can make the concrete surface look worn out. The good news? 

With the right approach, you can restore that clean, bright surface and keep it looking sharp with some simple DIY concrete maintenance.

Whether you’re tackling spring cleaning or just trying to boost curb appeal, here’s your complete guide on how to clean a concrete driveway and keep it in top shape year-round –

How to Clean a Concrete Driveway: Step-by-Step

Cleaning your concrete driveway doesn’t have to be complicated, but doing it right makes a big difference in how it looks and how long it lasts. Here’s a step-by-step guide that walks you through the process from start to finish –

Step 1: Clear the Driveway

Start by removing all obstacles—cars, furniture, planters, or anything else that might be in the way. Sweep the surface with a heavy-duty outdoor broom or use a leaf blower to get rid of loose debris like leaves, dirt, grass clippings, or twigs.

Why it matters: You need a clean working surface to allow cleaners or degreasers to penetrate effectively and to avoid grinding loose debris into the concrete while scrubbing or pressure washing.

Step 2: Pre-Treat Concrete Stains

Before doing a full wash, identify and spot-treat any concrete stains—especially oil, grease, rust, or paint.

Properly pre-treating stains on your concrete driveway is essential because it tackles tough spots before they have a chance to set in deeper. Concrete is porous, so if you don’t address stains early, they can absorb into the surface and become nearly impossible to remove later. Pre-treating allows cleaners or degreasers to break down the stain more effectively, saving you time during the main cleaning process and preventing long-term discoloration or damage.

Pro Tip: Use a stiff nylon brush—metal brushes can scratch and wear down the concrete surface.

Step 3: Apply a Concrete Cleaner (Optional but Recommended)

If your driveway is stained, discolored, or has algae or mildew buildup, use a concrete cleaner or detergent made for pressure washers. Follow the manufacturer’s instructions for dilution and application. Spread the cleaner evenly over the surface using a sprayer, brush, or directly through your pressure washer’s detergent tank.

Let the cleaner sit for 5–10 minutes (or as directed), allowing it to break down grime, mold, or algae.

Note: Avoid cleaners that contain harsh acids or bleach unless you’re addressing very specific stains, as they can cause concrete spalling and other damage.

Step 4: Pressure Wash the Driveway

A pressure washer is the most effective tool for cleaning a concrete driveway thoroughly. Use a unit with at least 3000 PSI for best results, and equip it with a 25- or 40-degree nozzle to prevent etching or damaging the surface.

  • Work in sections, starting at the highest point of your driveway and moving downward.
  • Hold the nozzle about 12 inches from the surface and move in overlapping, sweeping motions.
  • For very dirty spots, you may need to go slower or do a second pass.

No pressure washer? A high-powered garden hose with a spray nozzle and lots of elbow grease can work, but it may take longer and be less effective.

Step 5: Rinse Thoroughly

After pressure washing and scrubbing, rinse the entire surface to remove loosened dirt and any leftover cleaning solution. Make sure all residue is gone, especially near edges or where water can pool.

Important: If you used any cleaning products, be sure to rinse them off completely to avoid streaking, surface discoloration, or harm to nearby plants.

Step 6: Let the Surface Dry Completely

Allow the driveway to dry for at least 24–48 hours, especially if you’re planning to apply a concrete sealer afterward. Drying time may vary based on temperature, humidity, and sun exposure.

Tip: Don’t rush this step—trapped moisture can prevent sealer from bonding properly or create cloudy spots.

With your driveway now clean and dry, it’s the perfect time to inspect it for any cracks or surface damage you might want to repair—and consider sealing it to protect your hard work.

DIY Concrete Maintenance Tips

  • Seal your concrete driveway every 2–5 years
  • Remove stains quickly
  • Avoid deicing chemicals that can damage the surface
  • Watch for cracks and patch early
  • Avoid long-term parking of heavy equipment

Natural Concrete Cleaning Solutions

  • Vinegar and water for mildew
  • Baking soda paste for light stains
  • Hydrogen peroxide + dish soap for grease spots

Concrete Cleaning FAQs:

  • How Often Should You Clean Your Concrete Driveway? At a minimum, aim to clean it once or twice a year—spring and fall are ideal. If you deal with heavy oil leaks, snowmelt, or tree debris, seasonal cleaning may be needed more often.
  • How to Get Oil Out of Concrete? Use a degreaser specifically made for concrete or apply a baking soda paste to the oil stain. Let it sit for 15–30 minutes, scrub with a stiff-bristle brush, then rinse. For older stains, a pressure washer combined with a degreaser can help lift deep-set oil.
  • How to Remove Rust From Concrete? Rust stains often come from metal furniture, tools, or hard water. Use a commercial rust remover made for concrete, or try a DIY mix of lemon juice or vinegar with baking soda. Apply it to the stain, scrub gently, and rinse thoroughly. Avoid bleach—it can worsen rust stains.
  • How to Seal Concrete? Wait until your driveway is fully clean and dry (usually 24–48 hours after washing). Use a concrete sealer designed for driveways—either a penetrating or surface-level sealer. Apply it with a roller or sprayer in thin, even layers. Let it cure for at least 24 hours before driving on it. Reapply every 2–5 years for best protection.
  • How to Get Paint off Concrete? Start with a scraper to remove as much dried paint as possible. For tougher spots, use a concrete-safe paint remover or stripper. Apply according to instructions, scrub with a wire brush or stiff broom, and rinse well. Avoid harsh chemicals like muriatic acid unless you’re experienced, as they can damage the surface.
  • How to Remove Moss From Concrete? Moss grows in shaded, damp areas. To remove it, use a mixture of water and white vinegar (1:1 ratio), apply it to the moss, let it sit for 15–20 minutes, then scrub and rinse. For heavy buildup, a power washer is effective. Keeping the area dry and applying a concrete-safe moss killer can prevent regrowth.

Ensuring a Clean Concrete Driveway That Will Last

Knowing how to clean a concrete driveway and maintain it properly can go a long way toward protecting your home’s exterior and increasing its value. 

When it comes to cleaning your concrete driveway, you don’t need fancy equipment or a professional cleaning crew to make it look new again—just a little time, the right tools, and a few smart DIY habits.

Need professional driveway replacement services? Contact Scholten Construction at 605-351-0861 for experienced concrete driveway services in Sioux Falls, SD, and the surrounding areas. 

READY TO GET STARTED?

REQUEST YOUR ESTIMATE NOW

If you’re ready to experience The Scholten Difference, complete the form below or give us a call directly during business hours at 605-351-0861.

Share the Post:

Recent Articles